FAQ | Setup Tutorial | Phone Config Guides | Requirements | Open a Support Ticket
Linksys SPA 2102

The Linksys Phone Adapter enables use of our high-quality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With our company, you'll get clear telephone reception and reliable fax connections, even while using the Internet at the same time for normal data operations.

STEP 1

You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and dial:
                         **** (four asterisks)

then dial:

                        110 #                        

and you will be told the IP address of your device (e.g. 192.168.0.100)

Download the latest version firmware - here

STEP 2

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

STEP 3

Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.


STEP 4

You need to modify only a few parameters from the factory default. They are listed here:
Proxy Business Service: :   sip.bbvoice.com.au
Proxy Residential Service    (Address found in your activation email)
Display Name:   Enter your Full name, this will show up as part of your callerid.
User ID:   Enter the login number from your activation email
Password:  

Enter the password from your activation email

STEP 5

To save bandwidth, you can change Line 1 "Preferred Codec" to G729a. Also change the "Use Pref Codec Only" to Yes. You can only do this for one line. So, if Line 1 is on G.729a, Line 2 has to be some other codecs. Only Business Plans supprt G.723.

Audio Configuration

Now click on the SIP TAB on top and change the RTP PACKET SIZE to 0.020
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum:
Stats In BYE:  


STEP 6

Click on the "Save Settings " button at the bottom of the form.


STEP 7

Make calls!

 

How do I upgrade Linksys PAP2-NA firmware?   The latest Firmware file can be downloaded here. Open the file when download is complete and enter the IP address of the PAP2T-AU.